Self-adhesive waterproof membrane system
Product Overview
Self-adhesive bitumen waterproofing membrane is with SBS, TP,
soaking agent additive reactive blending synthetic polymer modified
asphalt binder, together with the activity of the special additives
made of waterproof plastic material, the surface layer covered with
a polyethylene film (aluminum foil or colored sand) for the surface material, the
underside of the paper with silicone anti-sticking isolation
membrane or both sides of paper for the isolation of double-sided
silicone adhesive waterproof membrane can be as waterproof layer of
polymer cement mortar to stick access layer to form self-adhesive composite sheet system.
Cladding materials are self-adhesive membrane, the surface material
HDPE, AL can play a role in supporting water. Double-sided self-adhesive waterproof membrane is a layer of rubber
adhesive to waterproof, two separate paper for the silicone
adhesive waterproof membrane can double. Matrix divided by carcass and non carcass two. Wet laying method, the polymer cement mortar thickness3mm, can be
used as adhesive layer; polymer cement mortar thickness6mm, it can
serve as a rigid waterproof layer (G B501 08-2001) and the newly
formed white stick waterproofing membrane soft 2
Waterproof layer.
Scope
For industrial and civil buildings roof, basement, interior, public
works and water reservoirs, swimming pools and the metro tunnel
waterproofing. Also applies to wood and metal structure roof waterproofing. Should not be used especially for the oil depot fire, chemical
plants, textile mills, grain storage and other water projects.
System Optimization
Construction Company under a lot of practice of the construction
characteristics of underground works, and the light of the
successful experience of developed countries to conclude
self-adhesive waterproofing membrane pre-shop-type construction
method, greatly improving the reliability of self-adhesive
waterproof effect. In the tunnel, subway, underground engineering applications such as
cut and cover part of the effect is especially significant.
Bonding mechanism
Self-adhesive membrane with pre-shop-type construction, is the
product pre-installed in the cushion to protect the wall, diaphragm
wall or pile on, pouring concrete structure. As the product formula contains special active substances with the
flow of cross-linked concrete engagement with each other to form a
strong adhesive force to achieve waterproofing membrane structures
completely filled with paste, seamless. Increase the maximum reliability of self-adhesive waterproof
membrane and waterproof effect.
Storage and Transport
There should be cool and dry coil, better ventilated environment to
avoid direct sunlight rain shower. Different types of specifications sheet shall be stacked
separately.
No child should be flat, stacked layers of preferably not more than
five. The fetal and stand up no more than 2 layers.
The storage period is 12 months. (From production date)
Polymer-metal foil for waterproofing
high extension, high elasticity, tensile strength
anti-aging
Cold construction, construction to facilitate
avoid stress tend to roll quite a bit of overlap caused by the
phenomenon of fragile and break
primary bond with superior performance, avoid the occurrence of the
phenomenon of channeling water
avoid adhesive is not water-resistant, plastic junction phenomenon
can not be restored after degumming
Double-sided self-adhesive waterproofing membrane
relatively low tensile strength, high elongation
should not be exposed
Cold construction, construction to facilitate
high extension, shear strain of the superior, reliable lap close
excellent and self-healing of closed
excellent bonding properties, and long-term in the viscoelastic
state, to ensure the integrity of the waterproof layer
